螺絲

A much-anticipatpowder metaled application of rapid prototyping is rapid tooling， the automatic fabrication of production quality machine tools。 Tooling is one of the slowest and most expensive steps in the manufacturing process， because of the extremely high quality requiredsintered metal。 Tools often have complex geometries， yet must be dimensionally accurate to within a hundredth of a millimeter。 In addition， tools must be hard， wear-resistant， and have very low surface roughness (about 0。 5 micrometers root mean square)。 To meet these requirements， molds and dies are traditionally made by CNC-machining， electro-discharge machining， or by hand。 All are expensive and time consuming， so manufacturers would like to incorporate rapid prototyping techniques to speed the process。 Peter Hilton， president of Technology Strategy Consulting in Concord， MA， believes that "tooling costs and development times can be reduced by 75% or more" by using rapid tooling and related technologies。 Rapid tooling can be divided into two categories， indirect and direct。

Indirect Tooling: Most rapid tooling today is indirect: RP parts are used as patterns for making molds and dies。 RP models can be indirectly used in a number of manufacturing processes:Thomas Sabo Bracelets

(1)Vacuum Casting: In the simplest and oldest rapid tooling technique， a RP positive pattern is suspended in a vat of liquid silicone or room Temperature vulcanizing (RTV) rubber。 When the rubber hardens， it is cut into two halves and the RP pattern is removedsintered metal。 The resulting rubber mold can be used to cast up to 20 polyurethane replicas of the original RP pattern。 A more useful variant， known as the Kiloton sintering process， uses the rubber molds to produce metal tools。 Developed by 3M and now owned by 3D Systems， the Kiloton process involves filling the rubber molds with powdered tool steel and epoxy binder。 When the binder cures， the "green" metal tool is removed from the rubber mold and then sintered。 At this stage the metal is only 70% dense， so it is infiltrated with copper to bring it close to its theoretical maximum density。 The tools have fairly good accuracy， but their size is limited to fewer than 25cm。

(2)Sand Casting: A RP model is used as the positive pattern around which the sand mold is built。 LOM models， which resemble the wooden models traditionally used for this purpose， are often used。 If sealed and finished， a LOM pattern can produce about 100 sand molds。

(3)Investment Casting: Some RP prototypes can be used as investment casting patterns。 The pattern must not expand when heated， or it will crack the ceramic shell during autoclaving。 Both Strategy’s and Cubical make investment casting wax for their machines。 Paper LOM prototypes may also be used， as they are dimensionally stable with temperature。 The paper shells burn out， leaving some ash to be removed。

To counter thermal expansion in stereo lithography parts， 3D Systems introduced Quick Cast， a build style featuring a solid outer skin and mostly hollow inner structure。 The part collapses inward when heated。 Likewise， DTM sells True form polymer， a porous substance that expands little with temperature rise， for use in its SLS machines。

(4)Injection molding: CEMCOM Research Associates， Inc。 has developed the NCC Tooling System to make metal/ceramic composite molds for the injection molding of plastics。 First， a stereo lithography machine is used to make a match-plate positive pattern of the desired moldingsintered metal。 To form the mold， the SLA pattern is plated with nickel， which is then reinforced with a stiff ceramic material。 The two mold halves are separated to remove the pattern， leaving a matched die set that can produce tens of thousands of injection moldings。

Direct Tooling : To directly make hard tooling from CAD data is the Holy Grail of rapid tooling。 Realization of this objective is still several years away， but some strong strides are being made。

(1)Rapid Tool: A DTM process that selectively sinters polymer- coated steel pellets together to produce a metal mold。 The mold is then placed in a furnace where the polymer binder is burned off and the part is infiltrated with copper (as in the Retool process)。 The resulting mold can produce up to 50，000 injection moldings。

In 1996 Rubbermaid produced 30， 000 plastic desk organizers from a SLS-built mold。 This was the first widely sold consumer product to be produced from direct rapid tooling。 Extrude Hone， in Irwin PA， will soon sell a machine， based on MIT´s 3D Printing process that produces bronzesintered metal-infiltrated PM tools and products。