螺絲

A cable is a wirComposite cablee or a combination of wires that carries information or signals from one port to other。 A cable assembly or wire harness is a whole set of cables and supporting parts like retention system， shielding， handle and connectors。 The wire harness is customized in terms of length and weight in order to fit to the requirement， which makes the custom cable assemblies or custom wire harnesses。



Applications and Utilities



Today， custom wire harnesses are basically used almost everywhere where information needs to be transmitted。 They are equipped in applications such as consumer electronics and home appliances， office and home automation products， farm equipment， aircraft and aerospace， industrial machinery， lighting， agricultural equipment and a lot more。



Manufacturing



There are many cable harness manufacturing companies in the world fulfilling the need for custom wire harnesses of different commercial and industrial sectors。 The manufacturers are divided into two categories - Original Equipment Manufacturers (OEMs) and Contract Manufacturers。 The OEMs engage in making the main equipment or the entire device， but do not manufacture the supporting components since the investment and inventory can go excessively high。



In this method associate degree initial solder paste is applied on the PCB employing a stencil。 This concludes the initial binding method of the assorted elements to the PCB。



This is thought of because the heart ofCustom cable the whole production line。 Here all individual chips area unit taken and placed accurately on their selected spots on the PCB。



This is otherwise referred to as the Reflow mechanism。 during this mechanism the board， when fixing the chips onto the solder paste， goes through a conveyor kitchen appliance to soften the solder and bind the chips the PCB。



There area unit some boards that need lacquer coating for cover。 Conformal coating method involves some special machinery work to use a protecting coating quickly and accurately。



Automatic Optical examination (AOI) and automatic X-ray examination (AXI) area unit 2 methodes done to form certain the overall assembly process is free from errors and mistakes。



Well， this can be done once any element or device is found defective or the full assembly doesn´t perform properly。 when testing remodeling is finished by heating the board and commutation the defective a part of the PCB with a decent one。



So，Medical cable contract manufacturing firms are there who take the designing and manufacturing orders of the components and products， and supply them to the OEMs。